Top 10 Best Ls Heads For Turbo Based On Scores

Last Update:

Our team studied on 43786 reviews available online for Ls Heads For Turbo, chose the finest ones and prepared Ls Heads For Turbo Reviews for you. It was very difficult to shortlist the ideal Ls Heads For Turbo from thousands of products online. However, We tried to make sure that you get only the Best Ls Heads For Turbo from our suggestions. Check our listings-:

Best Ls Heads For Turbo
NoProductScoreAction
1LS1 Cylinder Head Gaskets 4.89.8Check on Amazon
2T4 TURBO MANIFOLD CAST for VORTEC LS MOTORS 4.8 5.3 5.7 6.0 6.2 4x2 4x49.8Check on Amazon
3Exhaust Header Manifold For Chevrolet LS1 LS6 LSX V8 Turbo+2 x Elbows T3 T4 To V Band 3.09.6Check on Amazon
4How to Build New Hemi Performance on the Dyno: Optimal Parts Combos for Max Horsepower (Performance How to Sa Design)9.6Check on Amazon
5Head Stud Replacement Kit for 2004+ Chevrolet Gen III IV LS 6.0L9Check on Amazon
6ICT Billet 4pc LS Cylinder Head Install Alignment Dowel Pin Steel LT Gen 3 Gen 4 Gen 5 LSX LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 L82 L83 L84 L86 L87 LT1 L8B 5512758.8Check on Amazon
7Jack Black - Pure Clean Daily Facial Cleanser8.8Check on Amazon
8LS Cylinder Head Freeze Plug Retainer Hold Down Plate Billet Turbo Holding Bracket Billet Aluminum LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Holder Compatible with Chevy 551122-LS018.6Check on Amazon
9CHEVY GM LS Turbo Exhaust Hotparts T4 Kit Vortec V8 4.8 5.3 6.0 LSX Manifolds8.6Check on Amazon
10Brian Tooley Racing LS9 Cylinder Head Gaskets MLS PAIR Turbo Multi Layer 4.100 Bore8.6Check on Amazon

Comparison Chart for Best Ls Heads For Turbo

We’ve scanned 43786 reviews for you. If you are looking for the Ls Heads For Turbo than this review article may help you.

Table Of Content:

1. LS1 Cylinder Head Gaskets 4.8

  • Pair of LS1 Cylinder Head Gaskets Multi Layer
  • MLS head gasket that can be used on 4.
  • 3.920″ Bore, .051″ compressed thickness
  • This gasket has everything you know and love from the GM version: High quality, MLS construction, and it’s produced by the same source as the OEM units!.
  • Very common head gasket to use on Turbo and Supercharged engines.

2. T4 TURBO MANIFOLD CAST for VORTEC LS MOTORS 4.8 5.3 5.7 6.0 6.2 4×2 4×4

  • STRONG CAST TURBO MANFOLD with T4 FLANGE
  • T4 CAST MANIFOLD FOR PASS. SIDE ON ALL LS/VORTEC MOTORS..
  • AMAZING STYLE with EXTRA THICK HEAD FLANGE

3. Exhaust Header Manifold For Chevrolet LS1 LS6 LSX V8 Turbo+2 x Elbows T3 T4 To V Band 3.0

  • Huge 1 3/4″ Stainless Primary Tubes (true 1 3/4 unlike the others listing the same header by multiple companies with multiple sizes).
  • 7/16″ Thick Flanges 3″ V-Band Collectors, CNC Mandrel Bent Pipes for Excellent Flow, 4 to 1 Header Design to Create a Compact Package for Universal.
  • T3 : hole to hole 45*86mm/T4 : hole to hole 70*83mm/V band Flange 80mm ID 93mm OD.
  • 304 Stainless Steel Cast and Machined Adapter, with Tight Radius.
  • Application : Small Block V8 LS1/LS2/LS3/LS6 LSX 4.8L, 5.3L, 5.7L, 6.0L, 6.2L

4. How to Build New Hemi Performance on the Dyno: Optimal Parts Combos for Max Horsepower (Performance How to Sa Design)

5. Head Stud Replacement Kit for 2004+ Chevrolet Gen III IV LS 6.0L

  • DIRECT FIT REPLACEMENT – Fits selected 2004+ Chevrolet Gen III IV LS 6.
  • ULTRA STRENGTH – XOTIC 7200 material properties allow for far greater tensile strength compared to 8740 chromoly steel head studs.
  • EASY INSTALLATION – Broached stud ends install & make cylinder head removal easier.
  • KIT INCLUDES – 30x Heads Studs, 30x Nuts, 30x Hardened Parallel Washers, 2x Sockets, 2x Allen Wrench, 1x Fastener Assembly Lubricant & Instruction Manual.
  • WORRY-FREE PURCHASE – Xotic Performance is dedicated to offering LIFETIME WARRANTY and full money back guarantee if you aren’t satisfied.

6. ICT Billet 4pc LS Cylinder Head Install Alignment Dowel Pin Steel LT Gen 3 Gen 4 Gen 5 LSX LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 L82 L83 L84 L86 L87 LT1 L8B 551275

  • Replace Your Rusty or Missing Dowels Before you Assemble Your Engine
  • These are Required when Installing Cylinder Heads on Your LS Engine
  • Compatible with all Gen 3 4 and 5 LS/LT Series Engine
  • Includes 4 Dowel Pins Enough to install 2 cylinder heads
  • Stock replacement cylinder head bolts also available for LS engines

7. Jack Black – Pure Clean Daily Facial Cleanser

  • Oat and coconut derived, sulfate-free surfactants gently but effectively cleanse the skin
  • Witch Hazel acts as a natural astringent with soothing properties
  • Certified Organic Sage Leaf and Rosemary provide antibacterial and healing benefits
  • Certified Organic Chamomile and Aloe Leaf help soothe and reduce redness
  • Dual-purpose 2-in-1 liquid cleanser and toner removes deep-down dirt and oil, for clear, smooth, shave-ready skin; works gently, without over-drying, to leave your complexion clean, hydrated and fresh.

8. LS Cylinder Head Freeze Plug Retainer Hold Down Plate Billet Turbo Holding Bracket Billet Aluminum LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Holder Compatible with Chevy 551122-LS01

  • Keep your cylinder head freeze plugs from blowing out when running turbochargers with high amounts of boost, potentially causing high internal cooling system pressures.
  • Includes 4 freeze plugs, and mounting bolts (enough for both cylinder heads – front and rear)
  • Made in Wichita Kansas from aerospace grade, USA produced, billet aluminum
  • Compatible with all GM gen III and IV cylinder heads
  • Install the retainer plates over the top of the existing freeze plugs in your heads.

9. CHEVY GM LS Turbo Exhaust Hotparts T4 Kit Vortec V8 4.8 5.3 6.0 LSX Manifolds

  • CHEVY GM LS Turbo Exhaust Hotparts T4 Kit Vortec V8 4.8 5.3 6.0 LSX Manifolds
  • NO NEED TO RELOCATE ALTERNATOR LIKE THE OTHER GUYS
  • 1999-Current
  • 4.8/5.3/5.7/6.0/6.2 V8
  • Super Strong Design Custom Swap Setup

10. Brian Tooley Racing LS9 Cylinder Head Gaskets MLS PAIR Turbo Multi Layer 4.100 Bore

  • BTR LS9 Cylinder Head Gaskets MLS PAIR
  • BTR Performance Multilayer Head Gasket for LS9 engines, can also be used with LS3, LS2 and 6.
  • 4.100″ bore, .055″ compressed thickness, 7 layer
  • These are possibly THE best gaskets for engines up to 4.100″ bore.
  • Very common head gasket to use on Turbo and Supercharged engines.

Ls Heads For Turbo Buying Guide


Does the thought of finding a great Ls Heads For Turbo stress you out? Has your mind been juggling between choices when it comes to buying Ls Heads For Turbo in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Ls Heads For Turbo for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Ls Heads For Turbo Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Ls Heads For Turbo in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Ls Heads For Turbo currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Ls Heads For Turbo brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Ls Heads For Turbo based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Ls Heads For Turbo before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Ls Heads For Turbo they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Ls Heads For Turbo, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Ls Heads For Turbo before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Ls Heads For Turbo will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Ls Heads For Turbo if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Ls Heads For Turbo on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Ls Heads For Turbo on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Ls Heads For Turbo featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Reply

Your email address will not be published.