Top 10 Best Intake Manifold For Vortec Heads Reviews With Scores

Last Update:

Our team studied on 61195 reviews available online for Intake Manifold For Vortec Heads, chose the finest ones and prepared Intake Manifold For Vortec Heads Reviews for you. It was very difficult to shortlist the ideal Intake Manifold For Vortec Heads from thousands of products online. However, We tried to make sure that you get only the Best Intake Manifold For Vortec Heads from our suggestions. Check our listings-:

Best Intake Manifold For Vortec Heads
NoProductScoreAction
1JEGS Small Block Chevy 1996-2002 AirGap Intake Manifold - For Use With Vortec Cast Iron Cylinder Heads - 1500-6500 RPM Power Range - Satin Aluminum - Square Bore Carburetor Mounting Pad9.6Check on Amazon
2SteelSeries Arctis 5 - RGB Illuminated Gaming Headset with DTS Headphone: X v2.0 Surround - for PC and PlayStation 4 - Black9.6Check on Amazon
3Small Block Chevy Intake Gasket Set9.4Check on Amazon
4ICT Billet Gen 5 L83 L86 LT1 Cylinder Head to LT4 Tall Supercharger Adapter Plates Intake Manifold 5517709.4Check on Amazon
5Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc9.2Check on Amazon
6Speedmaster 1-147-035 Fits Chevy SBC 350 HiRise Vortec Intake Manifold Machine Polished9Check on Amazon
7JEGS Small Block Chevy 1996-2002 Intake Manifold - For Use With Vortec Cast Iron Cylinder Heads - Non-EGR - Idle - 5500 RPM Power Range - Black Cast Aluminum - Square Bore Mounting Pad8.8Check on Amazon
8JEGS Small Block Chevy 1996-2002 Intake Manifold - For Use With Vortec Cast Iron Cylinder Heads - Non-EGR Design - Idle - 5500 RPM Power Range - Polished Aluminum - Square Bore Carburetor Mounting Pad8.8Check on Amazon
9Small Block Chevy Intake Gasket Set8.8Check on Amazon
10Speedmaster 1-147-004 LowRise Intake Manifold 1996-Up Small Block Chevy 350 Vort8.6Check on Amazon

Comparison Chart for Best Intake Manifold For Vortec Heads

We found 61195 reviews when researching. We have considered users feedback on the Intake Manifold For Vortec Heads and our suggestions includes only the finest of them in this article.

Table Of Content:

1. JEGS Small Block Chevy 1996-2002 AirGap Intake Manifold - For Use With Vortec Cast Iron Cylinder Heads - 1500-6500 RPM Power Range - Satin Aluminum - Square Bore Carburetor Mounting Pad

  • IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake.
  • DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more.
  • FITS GM AND CHEVROLET VORTEC CAST IRON CYLINDER HEADS from 1996 through 2002
  • 1500 TO 6500 RPM POWER BAND for street or mild race applications
  • FABRICATED FROM CAST ALUMINUM for weight savings and improved performance

2. SteelSeries Arctis 5 – RGB Illuminated Gaming Headset with DTS Headphone: X v2.0 Surround – for PC and PlayStation 4 – Black

  • Arctic 5 combines cutting edge audio technology with independent game and chat controls and RGB illumination for an immersive gaming experience.
  • Arctic speaker drivers produce ultra-low distortion, paired with DTS headphone’s v2.
  • Widely recognized as the best mic in gaming, arctic clear cast bidirectional microphone delivers studio quality voice clarity and background noise cancelation.
  • The inline USB chat mix dial balances game audio and chat volume on the fly
  • Padded air weave ear cushions and adjustable, steel reinforced headband provide long-lasting comfort and durability.

3. Small Block Chevy Intake Gasket Set

  • 060″ or .125″ thick gaskets (no end seal)

4. ICT Billet Gen 5 L83 L86 LT1 Cylinder Head to LT4 Tall Supercharger Adapter Plates Intake Manifold 551770

  • Adapt LT cylinder heads to a LT4 supercharger
  • Compatible with 2014 and newer V8 LT series engines
  • Includes: 2 adapter plates (2-1/2″ thick) with 8 O-ring seals, 10 adapter to head bolts, and 10 supercharger to adapter bolts.
  • Tall design allows the LT4 supercharger to clear the factory L83 / L86 water pump
  • Made in Wichita, Kansas from aerospace grade, USA produced billet aluminum

5. Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc

  • High grade aluminum, bronze valve guides, hardened seats, advance port design for greater air flow
  • This head is 200cc intake runner with a 68cc combustion chamber, 68cc combustion chambers improve performance and retains stock compression on 1970 and earlier.
  • Intake Valve Diameter: 2.020″ ; Exhaust Valve Diameter: 1.600″ ; Intake Port Volume: 200cc
  • Combustion Chamber Volume: 68cc ; Intake Port: Square ; Exhaust Port: Square
  • Lighter than Iron Heads. Each Head weighs 10.33kg ; 3-Angle Valve Seat ; Spark Plug Angle : Straight

6. Speedmaster 1-147-035 Fits Chevy SBC 350 HiRise Vortec Intake Manifold Machine Polished

  • 147 Intake Manifold, Carbureted
  • Speedmaster creates unique & distinctive DNA items inspired by the blend of old and new technology.
  • TRACK PROVEN – Surviving the longevity of road, race and recreation is mandatory for all Track Proven products, Bringing you closer to product perfection.

7. JEGS Small Block Chevy 1996-2002 Intake Manifold - For Use With Vortec Cast Iron Cylinder Heads - Non-EGR - Idle – 5500 RPM Power Range - Black Cast Aluminum - Square Bore Mounting Pad

  • IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake.
  • DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more.
  • FABRICATED FROM BLACK CAST ALUMINUM for weight savings, great looks, and improved performance
  • FITS GM AND CHEVROLET VORTEC CAST IRON CYLINDER HEADS from 1996 through 2002
  • IDLE TO 5500 RPM POWER BAND for street or mild race applications

8. JEGS Small Block Chevy 1996-2002 Intake Manifold - For Use With Vortec Cast Iron Cylinder Heads - Non-EGR Design - Idle – 5500 RPM Power Range - Polished Aluminum - Square Bore Carburetor Mounting Pad

  • IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake.
  • DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more.
  • FITS GM AND CHEVROLET VORTEC CAST IRON CYLINDER HEADS from 1996 through 2002
  • IDLE TO 5500 RPM POWER BAND for street or mild race applications
  • FABRICATED FROM CAST ALUMINUM for weight savings and improved performance and then polished for beautiful looks under your vehicle’s hood.

9. Small Block Chevy Intake Gasket Set

  • Gaskets are .060″ thick
  • S/B Chevy intake gasket set
  • No end seals – use silicone gasket maker
  • Heat crossover port is blocked
  • Dual bolt pattern gasket to fit both standard Chevy and Vortec intakes

10. Speedmaster 1-147-004 LowRise Intake Manifold 1996-Up Small Block Chevy 350 Vort

  • 1996-Up Small Block Chevy 350…
  • Height: 4.250 in….
  • Non-EGR…
  • RPM Range: Idle-5,500…
  • Polished Finish The Speedmaster LowRise Manifolds are our lowest profile manifold and is also the only one that is street legal on pollution controlled vehicles.

Intake Manifold For Vortec Heads Buying Guide


Does the thought of finding a great Intake Manifold For Vortec Heads stress you out? Has your mind been juggling between choices when it comes to buying Intake Manifold For Vortec Heads in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Intake Manifold For Vortec Heads for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Intake Manifold For Vortec Heads Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Intake Manifold For Vortec Heads in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Intake Manifold For Vortec Heads currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Intake Manifold For Vortec Heads brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Intake Manifold For Vortec Heads based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Intake Manifold For Vortec Heads before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Intake Manifold For Vortec Heads they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Intake Manifold For Vortec Heads, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Intake Manifold For Vortec Heads before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Intake Manifold For Vortec Heads will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Intake Manifold For Vortec Heads if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Intake Manifold For Vortec Heads on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Intake Manifold For Vortec Heads on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Intake Manifold For Vortec Heads featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Reply

Your email address will not be published.